Woo Audio WA2 Single-ended - Manual (Page 8)

©2011 WOO AUDIO tm Inc. All rights reserved. www.wooaudio.com Rev 1.1. May 24, 2012. 8
Installing the power cord:
Plug the power cord into the AC inlet. See ① in the below diagram. The AC inlet socket is a
standard IEC type. You will need to obtain the correct type for your region.
Installing the source input:
Plug the RCA interconnection cable into the RCA connectors; see ④ in the below diagram.
Back panel diagram:
① AC inlet
② AC voltage selection switch
③ RCA pre-amp output
④ RCA inputs, 4 pairs
U.S. European U.K.