Woo Audio WA22 Fully balanced - Manual (Page 4)

©2011 WOO AUDIO tm Inc. All rights reserved. www.wooaudio.com Rev 1.0. June 9, 2011. 4
Overview
Thank you for choosing a Woo Audio product. The WA22 is a finely hand-crafted
amplifier that delivers uncompromised performance and superior listening experience.
 Point-to-Point wiring
 True balanced topology
 All tubes. No semi-conductors in the entire signal circuitry
 Soft start tube protection circuit
 One 5U4G rectifier tube
 Two 6SN7 drive tubes, one per channel
 Two 6AS7 / 6080 power tubes, one per channel
 DACT CT2 balanced stereo stepped attenuator
 One balanced XLR input
 One single-ended RCA input
 One mono 3-pin headphone output (left and right channel)
 One 4-pin stereo headphone output
 One TRS headphone output (1/4”)
 High and low impedance headphone output
 Die cast full aluminum enclosure and knobs, anodized finished