Woo Audio WA6-SE (Special Edition) Headphone Amplifier - Manual (Page 8)

©2011 WOO AUDIO tm Inc. All rights reserved. www.wooaudio.com Rev 1.0. June 10, 2011. 8
Installing the power cord:
Plug the power cord into the AC inlet. See ② in the below diagram. The AC inlet socket is a
standard IEC type. You will need to obtain the correct type for your region.
Installing the DC cord:
Installing the source input:
Plug the RCA interconnection cable into the RCA connectors, see ⑤ in the below diagram. Or,
Back panel diagram:
① Voltage selection switch
② AC Inlet
③ DC output
④ DC input
⑤ RCA
⑥ Input selector
U.S. European U.K.
Align the mark on the
socket Align the mark on the
DC cord plug
Slightly push the plug
toward the socket
Turn the ring clockwise
until you hear a clicking
sound