Y-cam EyeBall Range User Manual
Page 35
Page 35
[Image flip vertical] Display video upside down – useful if you have installed the camera upside down.
[Moonlight Mode] Turns Moonlight mode on or off or set it to automatic. The Moonlight feature superimposes frames
in order to brighten the image being viewed. This is also known as frame integration. In “Auto” the camera uses the
front Light Level Sensor to detect the amount of light available to the camera. Should the light level below, the camera
would automatically turn this feature on.
[Power LED light] Turns off the Y-cam front LED on or off during normal operation.
[Show FPS in ActiveX] Show the Frames Per Second being transmitted by your camera within the live feed of ActiveX
(visible in Internet Explorer only)
Microphone / Audio Setting Options
[Microphone] Enables or disables the built-in microphone.
[Volume] Adjusts the sensitivity of the microphone from 0~14 where 0 is the lowest.
[G.726 bit rate] Four options: 16, 24, 32, 40(kbps). Determines the quality of the audio being transmitted.
The most commonly used mode is 32 Kbit/s.
[AMR bit rate] Determines the quality of the audio being transmitted to mobile phones using 3GPP.
Applies to products: YCBL03, YCBLB3, YCEB03, YCBLHD5
[Speaker Out] Enables or disables the Audio Upload.
[Volume] Adjusts the output level of the Speaker Out from 0~14 where 0 is the lowest.
Note: Higher bit rates are useful in noisy conditions but consume more bandwidth. Lower bit rates provide reasonable
quality for voice frequencies and are less demanding on your internet connection.
Once you have set your required settings, click Apply.