Y-cam EyeBall Range - Manual (Page 10)

Page 10
2.2 Y-cam Bullet Range at a glance
Applies to products: YCBL03, YCBLB3, YCBLHD5
Please note: The status LED on the Bullet is inside the camera. To access the led unscrew the
front part of the camera and lift this carefully from the lens array. Be careful not to break the
lens or infrared LEDs. The status LED of the camera will be visible.
Please note: To reset your Y-cam Bullet back to factory default settings, you will need to press
the reset button. This is located inside the Bullet and you will need to remove the front part of
the camera. Be careful not to break the lens or infrared LEDs. The reset button is located just
above the microSD slot.