Y-cam EyeBall Range - Manual (Page 21)

Page 21
5.0 WELCOME TO YOUR Y-CAM!
Once you have used the Y-cam Setup Software to find your camera and opened your selected camera, you will be
greeted with the Y-cam Homepage for your camera (which should look something like the below screenshot depending
on your model)
“Live View” - lets you view live video transmitted by the camera.
“Settings” - allows you to setup your camera with its various settings.
The address in the web browsers address bar should look something like
http://192.168.1.50 – this is your cameras
internal IP address.
Accessing this homepage is a common way to access the camera when you are using it on your
local network, so it may be worth writing down the address that is displayed in your web
browsers address bar or bookmarking it (Ctrl+D) so you can come back later. Of course, you
can run Y-cam Setup at anytime to find it again, but it may save you time to bookmark it.
Clicking either “Live View” or “Settings” will bring up a Login panel, similar to the below screenshot: