Y-cam EyeBall Range - Manual (Page 55)

Page 55
6.7.4 Alarm Management - FTP
The Y-cam can upload an image to an FTP server or send an email upon receiving an alarm from the motion detection
window. This page will cover how to upload to an FTP.
[Alarm Mode] Activates or deactivates the motion detection alarm.
[FTP Alarm Management] Enable/Disable uploading of images on motion detection to an FTP Server.
[Trigger Time] The number of seconds that the camera should keep sending images after motion stops.
[Trigger FPS] The number of frames per seconds that the camera should keep sending images at when an alarm is
triggered.
[FTP Server ID] Select the FTP Server number from the list (set under Alarm Server)
[Remote path] Path where to save the image file to the FTP server.
[Snapshot From] Select the stream from which it should get the snapshot.
[Image file name] A name for the Image.
[Suffix of file name] Image file name suffix can be either date and time or a sequence number
Effective Period:
[Always] Always trigger the alarm upon motion detection
[Schedule] Trigger the alarm according to the schedule
[Alarm interval time] Number of seconds for which the camera should stop uploading images after sending the first set.
This function is used to stop the camera from sending multiple alerts for the same alarm. Setting the time to 0 disables
this feature.
Click “Apply” to confirm your settings.