Y-cam EyeBall Range - Manual (Page 56)

Page 56
6.7.5 Alarm Management - Email
The Y-cam can also be configured to send an email when the Motion Detection alarm is triggered.
[Email Alarm Management] Enable/Disable sending of e-mails on motion detection.
[Trigger Time] The number of seconds that the camera should keep sending images after motion stops.
[Trigger FPS] The number of frames per seconds that the camera should keep sending images at when an alarm is
triggered.
[e-Mail Server ID] Select the e-mail server number from the list (set under Alarm Server).
[File attachment] Select if you would like a snapshot of the camera view attached to the e-mail.
[Snapshot From] Select the stream from which it should get the snapshot.
[Image file name] Any name for the Image.
[Suffix of file name] Image file name suffix can be either date and time or a sequence number.
Effective Period: [Always] Always trigger the alarm upon motion detection.
[Schedule] Trigger the alarm according to the schedule.
[Alarm interval time] Number of seconds for which the camera should stop sending e-mail alerts after the first set.
Setting the time to 0 disables this feature.
Click Apply to confirm your settings.