Y-cam EyeBall Range - Manual (Page 68)

Page 68
6.9.6 FTP Sending
Configures the camera to automatically upload the contents of your storage device onto an FTP Server.
Useful if you want to make an offsite backup, or transfer files to another network connected storage device such as a
NAS drive.
[FTP Sending] Enable/Disable uploading the contents of your storage to an FTP Server.
[FTP Server ID] Select the FTP Server number from the list.
[Remote path] Path where to save the image file once uploaded to the FTP server.
[Sending Period] Select where the files should be uploaded to the FTP Server.
[Always] Upload the contents of MicroSD onto FTP Server when a file is present.
[Schedule] Upload the files according to the schedule
File Period:
[All files] When uploading to FTP send all files.
[Schedule] upload only files that were recorded within the time frame specified by the schedule.
[FTP Upload Bandwidth] Available bandwidth to be used to upload the contents onto the FTP Server.
Click Apply to confirm your settings
Note: Depending on the conditions of network and the FTP server, there may be occasions when files will not transfer. In
such an event, this camera is able to make backup data on the storage device and send them later on.