4 maintenance, 5 recommendations, Aintenance – Y-cam EyeBall Range User Manual
Page 7: Ecommendations
Page 7
1.4 Maintenance
1. Ensure that the Y-cam and its power source have sufficient ventilation;
2. Do not shake strike or drop the product;
3. Keep the camera dry and dustless and avoid exposing it to direct sunlight;
4. Do not place the product near any magnetic objects;
5. Avoid putting the product in places where there is constant change in temperature and humidity;
6. Keep the product away from heat sources;
7. Do not use the camera near aggressive chemicals;
8. Do not use this camera near water (unless the camera is specified as waterproof);
9. Do not use the camera in the places which are enclosed by metal. The surrounding metal may shield the
electromagnetic waves, and result in failure of signal reception;
10. Please follow your local government environment protection policies;
11. Please turn off the power when left unused;
12. Do not disassemble or attempt to repair the camera; doing so might cause damage to the product and will invalidate
warranty.
Applies to products: YCB004, YCK004, YCB003, YCBP03, YCK003, YCBL03, YCBLB3, YCBLHD5
Please note: Infrared LEDs produce heat. Do not place any objects within 10cm of the LEDs or
allow any object to come in contact with the dome covering the LEDs.
1.5 Recommendations
1. New firmware versions are released periodically and they provide new features, improvement to existing features,
fixes to known issues or bugs etc. It is strongly recommended that you upgrade to the latest firmware version
available for your Y-cam product before set-up begins (as settings may be lost). To ensure that you have the most
recent firmware, please vis
2. New versions of the software available on the Setup CD may also be available, to ensure that you have the most
recent versions, please visi
3. It is recommended that Y-cam products are not installed near microwave ovens or DECT phones (cordless phones) as
these devices tend to interfere with the Wi-Fi signal.