Y-cam EyeBall Range - Manual (Page 83)

Page 83
7.6 Using Third Party Software
Any software that supports generic MJPEG cameras should work with Y-cam IP cameras.
In order to use the Y-cams with software that supports adding a generic MJPEG camera, please use the path of your
camera with “/stream.jpg” on the end of it. This will instruct the software to extract the Motion JPEG video stream from
the specified path in the Y-cam. All current Y-cam models support this method.
7.7 Alternative methods of accessing the video stream
You can also access video/images from the network camera in the following ways:

Motion JPEG server push - http:// <ip>:<port>/stream.jpg

Still JPEG images in a browser - http:// <ip>:<port>/snapshot.jpg

MJPEG via RTSP - rtsp://<ip>:<port>/live_mjpeg.sdp

MPEG4 via RTSP - rtsp:// <ip>:<port>/live_mpeg4.sdp
RTSP MPEG4 stream: rtsp:// <ip>:<port>/live_mpeg4.sdp
RTSP MJPEG stream: rtsp:// <ip>:<port>/live_mjpeg.sdp
HTTP MPEG4 stream: http:// <ip>:<port>/stream.av
HTTP MJPEG stream: http:// <ip>:<port>/stream.jpg
HTTP snapshot image: http:// <ip>:<port>/snapshot.jpg
For further details please click on the links in the “Stream Setup” page of the camera settings by the name of “Primary
Stream”, “Secondary Stream” and “Mobile Stream”.