HMDX FLOW™ Rugged Wireless Speaker EN - Manual

1. Plug one end of the cord into the speaker and the other
into the headphone jack on your device.
2. Turn on the speaker.
3. Hit PLAY on your device and crank it up—or down if
you’re lame.
You’ll have to play and pause the music from your device,
not your speaker. No problem. You’re there anyway, right?
USER GUIDE AND WARRANTY INFORMATION
Register your speaker at www.hmdxaudio.com. Information about where you bought it and how you’re
using it is like gold for the people who make these speakers. Do them a solid, will ya?
Por manual de instrucciones e información de garantía en español visítenos en
www.hmdxaudio.com.
There are lots of cool HMDX speakers. Check them all out at www.hmdxaudio.com.
Setup is pretty easy, but we put a manual together just in case you need it. It’s full of information and
sarcasm—just like that English teacher you had that crazy semester.
HEY. HAVE WE SEEN YOU HERE BEFORE?
1. This is the power button, press and hold for
5 seconds to power on.
2. This light lets you know when Bluetooth is
paired with your speaker.
3. Check out how much juice is in the battery.
4. Here's where you use a mini jack cord to
hook it up old-school.
5. The power cord goes here.
6. Turn the music up or down. (Wait, why do
you need to turn it down?)
7. Push it to play, push it again to pause.
8. Carabiner
CONTROL YOUR DESTINY...OR AT LEAST YOUR SPEAKER
HOOKING UP OLD SCHOOL AUDIO, JACK
Charging the speaker is so easy you’ve probably figured it out by now, but just in case,
you’ve got two options: You can charge it using your computer or a wall outlet.
Plug it in and your speaker will be ready for an epic night in no
time. You should go get ready too! It needs about 3 hours for
6 hours of party time.
JUST CHARGE IT
1. The cord that came with the speaker — the one with the
USB on one end and the Micro USB on the other — is
made to work with your computer.
2. If you want to use the wall outlet, you’ll need to pick up a
power cord with a Micro USB the next time you’re at the
store or use any USB AC adaptor, including the one for
your cell.
Like any amazing couple, this one starts with a
connection—one between your device and the
speaker’s Bluetooth.
Here’s how it works:
1. We know you’re probably going to think,
“derp” with this one, but we have to say it:
Make sure the smartphone, tablet or computer
you want to hook up to the speaker has
Bluetooth. (There. We got that out of the way.)
2. Turn on the speaker (press and hold for 5
seconds) and look for the little blinking light.
3. Do whatever your device needs you to do on
its end. (We don’t know what you’re using.
We’re not spies.)
4. Look for HMDX Flow in your device’s
Bluetooth list or click YES—whatever pops up
on your device—and BAM! you’re connected.
BLUETOOTH ® CONNECTION: IT’S A SETUP
5. Now hit PLAY on your speaker and crank it
up—or down if you’re lame.
You’re probably only going to have to do this
once, unless your device goes through a major
I-just-dropped-it-in-the-pool kind of reboot. The
device and Bluetooth will find each other every
time just as long as the speaker is set to
Bluetooth and your device’s Bluetooth is, you
know—on.
If you’re connecting to a computer, you may have
some extra steps on that end. You’ll have to get
that information from the computer company.
Depending on your device you may be prompted
to enter a pairing code. If prompted enter “
0000”
as the code.
Note: If you turn on your HMDX Flow but haven’t
started the party, it will automatically power off
after 2 minutes of unpaired inactivity.
HX-P310
©2014 HMDX. All Rights Reserved.
IB-HXP310
3
8
6
7
6 1
2
4 5
ALLOW US TO SHED SOME LIGHT
CHARGE
Solid RED Charging
Ready to Party (Light will only
show when unit is plugged in)
Light Off
Quick Flash BLUE Looking for Bluetooth
Slow Flash BLUE Connected
RED
Hooking up old-school
with a cord
What It Looks Like What it Means
PACKAGE CONTENTS
Charging Cord User Manual
Speaker
Carabiner
with Strap