Listening to the radio, Sleep feature, Projector function – HMDX Sleep Station™ Projection Alarm Clock EN User Manual

Page 3: Usb charging port, Connecting to 3.5mm audio input cable, Hmdx sleep station, Alarm clock radio controls and connections

Advertising
background image

4

5

listening to the radio

NOTE: For best reception, fully unwind the wire antenna. DO NOT strip, alter or attach to
other antennas.

1. To listen to the radio, press the POWER button located on top of the unit.

2. Press the SOURCE button on the unit until FM icon and station frequency appears on

the display.

3. Use the TUNER selector button on the top of the unit to select desired station. For

auto seek press and hold TUNER selector for 2 seconds and the tuner will find the

next station with the strongest frequency.

4. Press the POWER button to turn radio off.

sleep Feature

While listening to the radio or AUX source, press the SNOOZE/DIM/SLEEP button to
activate the sleep feature. This allows you to set a sleep timer for 60, 45, 30, and 15
minutes. Once set, the unit will continue playing for the set length of time, then will
automatically turn off.
NOTE: The Sleep Station does not turn off the MP3/AUX device.

proJeCtor FunCtion

The Sleep Station is equipped with a cool feature that allows you to project the TIME on
any flat surface.

1. To turn projector on, press the PROJECTOR button on top of unit.

2. Carefully move the PROJECTOR device up or down to change where the image

gets projected.

3. To adjust the focus, carefully turn the round end of the projector lens to the

desired focus.

4. Press the PROJECTOR button to turn off.

usB Charging port

• This USB port is for charging only. It cannot be used to play music through the unit.

• In order to use the USB charging feature, you must have the power cord to connect to

your device with a USB Type A connector on the other end.

ConneCting to 3.5mm audio input CaBle

1. Pull out the Audio Input Cable located on the front of the unit.

2. Plug the Audio Input Cable into the headphone input of an iPod/MP3 player or other

audio device.

3. Push power button on the unit, then push the source button and select AUX mode

(AUX icon will be displayed on LCD).

4. When the audio device is in play mode, the music will sound from the units speakers.

Use volume controls on top of unit or your music device to adjust the volume.

5. When finished, press the power button to turn off the unit.
NOTE: You must turn OFF your audio device.

hmdX sleep station

alarm CloCk radio

Controls and ConneCtions:

Power

Alarm 2

Volume

Up/Down

Alarm 1

FM Tuner

Scan Up/Down

Snooze/Dim/Sleep

Projector

Timeset

FM Antenna

12/24

Hour

DC5V Input

Projector

ON/OFF

Source

Projector

USB

3.5MM

AUX Cable

Advertising