Chemtronics CircuitWorks® Heat Sink Grease CT40-5 - Manual

PRODUCT DESCRIPTION
CircuitWorks

Heat Sink Grease silicone
compound facilitates heat transfer away
from electrical/electronic components. This
heavy consistency material is thickened
with a heat conductive metal oxide filler to
maintain a positive heat sink seal in
electrical/electronic equipment.
 Excellent conductivity
 Meets MIL-C-47113
 Noncorrosive
 High dielectric strength
 Low bleed
 Stable from -73
°C to 200°C
 Nonflammable
TYPICAL APPLICATIONS
CircuitWorks

Heat Sink Grease may be
used for electronics and applications
including:
 Effective Thermal Coupler For Any
Heat Sink Device
 Nonflammable Coating Protection
 High Voltage Corona Protection
 Excellent for Improving Readings on
Contact Type Thermocouples
TYPICAL PRODUCT DATA AND
PHYSICAL PROPERTIES
Color White
Specific Gravity @ 25
°C
( 77
°F) 2.6
Usable Temperature Range
-73
°C (-100°F) to 200°C (392°F)
Dielectric Strength, v/mil 500
Dielectric Constant @ 100 Hz 4.4
Dissipation Factor @ 100 Hz 0.005
Volume Resistivity, ohm-cm 1 x 10
14
Arc Resistance, seconds 120
Thermal Conductivity,
Cal-cm/sec-cm
2
-
°C 1.5 x 10 -3
BTU-in/hr-ft
2
-
°F 4.35
W/m
°K 0.63
Shelflife 5 years
COMPATIBILITY
CircuitWorks

Heat Sink Grease is
generally compatible with most materials
used in printed circuit board fabrication. As
with any silicone compound, compatibility
with substrate must be determined on a non-
critical area prior to use.
TDS # CT40
CHEMTRONICS
Technical Data Sheet
CircuitWorks

Heat Sink Grease