Cobra Electronics MRHH475FLTBTEU - Manual (Page 13)

21 Nothing Comes Close to a Cobra ®
Roger Beep Mode
Call Tone Select
VHF Marine Radio Protocols Operating Your Radio
20 English
Setup Mode Programming
Call Tone Select continued
To Set Call Tone:
1. From the previous press of the Call/Enter/Setup button,
the LCD will display the letter “C” and the current Call
Tone number (01 through 10).
2. Press the Channel Up/Down button to select a different
Call Tone. An example of each call tone will sound for
1.5 seconds.
3. Press Call/Enter/Setup button to save this entry and
move to the next Setup mode programming.
NOTE: Call Tones are not usually used for Marine
VHF communications. We allow you to turn it On for
your unique communication needs.
Roger Beep Mode
In Roger Beep mode, your listener will hear an audible tone
when you release the Talk button. This alerts your listener
that you are finished talking and it is OK for them to speak.
To Set Roger Beep On or Off:
1. Display will show ROG icon and ON or OFF flashing.
2. Press Channel Up/Down button to select ON or OFF.
ROG will be displayed when On.
3. Press Call/Enter/Setup button to save this entry and
move to the next Setup mode programming.
Key Tone Mode
In Key Tone mode, an audible tone will sound each time a
button is pressed or you change a setting.
To Set Key Tone On or Off:
1. Display will show Key Tone icon and ON or OFF flashing.
2. Press Channel Up/Down button to select ON or OFF.
3. Press Call/Enter/Setup button to save entry.
ATIS Mode
ATIS mode allows control over ATIS packet transmissions. This
mode is only visable after initial ATIS set-up (see page 25).
To Set ATIS On or Off:
1. Display will show ATIS icon and ON or OFF flashing.
2. Press Channel Up/Down button to select ON or OFF.
3. Press Call/Enter/Setup button to save entry.
You have now ended Marine (VHF) Setup mode
programming and will enter Marine Standby mode.
NOTE: Scan and Tri-Watch features are not available
when ATIS is on.
VHF Marine Radio Protocols Operating Your Radio
Bluetooth ® Mode Pairing
and Programming
Bluetooth ® wireless technology is a standard which has been developed for use
in mobile phones and other devices. This radio can be wirelessly linked to your mobile
phone if your mobile phone also has Bluetooth. This process of linking your mobile phone
and this radio is called “Pairing.” Once paired, this radio can act as
the speaker and microphone of your mobile phone while your phone is stowed
in a safe and dry location.
This programming section shows you how to complete the pairing process. It also shows you
how to change some settings related to the Bluetooth functionality of your radio.
Pairing Your Mobile Phone:
1. Press and release the Bluetooth button to enter Bluetooth
Standby. The LCD will change from VHF Standby mode
display to Bluetooth Standby mode display. The word “bLUE”
will be shown on the display and the blue keypad backlight
will come On.
2. Press and hold the Bluetooth button on the HH475BT for four
(4) seconds [until the radio beeps four (4) times] from the
Bluetooth
Standby mode. The blue backlight will flash for
some time. Your radio is now in a “Pairing Mode” and can be
“found” by your phone.
While in pairing mode, the LCD will display the sequence as
shown in the illustration below.
3. Follow the mobile phone’s instructions to search for available
pairing with another Bluetooth device. This can often be found
in the Tools or Settings menu of your mobile phone.
Enter the “P.I.N.” (Personal Identification Number 0000), on
your mobile phone when prompted. Wait for the pairing
process to complete.
Bluetooth ® Mode Pairing and Programming
Bluetooth Standby Mode,
Unpaired State
Key Tone Mode
Bluetooth Standby Mode,
Paired State
Bluetooth Pairing Mode
Sequence
ATIS Mode
MRHH475EU_MANL_vC.qx:MRHH475_ENG_Body 12/28/09 9:44 AM Page 20