Chemtronics Electro-Wash CZ ES7101 - Manual

PRODUCT DESCRIPTION
Electro-Wash

CZ Cleaner Degreaser is an all
purpose cleaner for electronics that is
nonflammable, non-ozone depleting, and safe
on plastics. This fast drying precision cleaner
contains Chemtronics’ Cirozane

, which is
based on new HFE technology. It is excellent
for removing grease, oil, and flux residues
from energized equipment.
 MIL-PRF-29608A (AS) Class C approved
 Removes dirt, oil, grease, flux and many
other contaminants
 Nonflammable
 Excellent material compatibility
 Non-ozone depleting
 Leaves no residues
 Evaporates quickly
 Low Odor
 Contains no CFCs, HCFCs, or
1,1,1 Trichloroethane
TYPICAL APPLICATIONS
Electro-Wash

CZ Cleaner Degreaser is
excellent for cleaning:
 Printed Circuit Boards
 Contacts
 Cable Assemblies
 Sensitive Plastic Surfaces
 Magnetic Heads
 Electronic Controls
 Edge Connectors
 Light Flux Residues
TYPICAL PRODUCT DATA AND
PHYSICAL PROPERTIES
Boiling Point 90
°F (Initial)
Flash Point (TCC) None to Boiling
Solubility in Water Negligible
Specific Gravity @77
°F
1.53
Evaporation Rate (Butyl acetate=1) >1
Appearance Clear, colorless liquid
Odor Slight Ethereal
Surface Tension
(dynes/cm @ 25
°C)
11.6
Kauri-Butanol (KB) 38
Dielectric Breakdown
(ASTM D-877) 17 kV
VOC* Content: Aerosol Liquid
CARB 38% 100%
SCAQMD 187 g/L 373 g/L
Federal 13% 28
%
RoHS Compliant
Shelflife Aerosols 5 years
Liquids 2 years after opening
*Volatile Organic Compound (VOC) information is calculated on a
weight basis using the VOC definition of California Air Resources
Board (CARB) Consumer Product Regulations, South Coast Air Quality
Management District (SCAQMD) Rule 102 and the Federal definition
published in 40 CFR 51.100(s).
COMPATIBILITY
Electro-Wash

CZ Cleaner Degreaser is
generally compatible with most materials used
in the electronics industry. With any cleaning
agent compatibility must be determined on a
non-critical area prior to use.
TDS # 7100
CHEMTRONICS
Technical Data Sheet
Electro-Wash

CZ
Cleaner Degreaser