Chemtronics Electro-Wash PN ES1678 - Manual

PRODUCT DESCRIPTION
Electro-Wash

PN New & Improved! Cleaner
Degreaser is a plastic safe and nonflammable
cleaner formulated for all aspects of cleaning
electronic components and assemblies. This
precision cleaner is fast drying and has excellent
solvency for oil, handling soils, dirt, and even
light flux residues.

Same great features as original formulation
but without HCFC-141b
 Removes dirt, grease, carbon, oil, and flux
residues
 Excellent plastic compatibility
 Nonflammable
 Dries very quickly
 Leaves no residue
 Noncorrosive
 Enhances electrical signals
 Available with All-Way Spray valve
 U.S. Patent 6,746,998
TYPICAL APPLICATIONS
Electro-Wash

PN New & Improved! Cleaner
Degreaser is engineered for cleaning:
 Printed Circuit Boards
 Chip Carriers
 Edge Connector Sockets
 Relays and Contacts
 Sensitive Plastic Components
 Electronic Controls
 Light Flux Residues
TYPICAL PRODUCT DATA AND
PHYSICAL PROPERTIES
Boiling Point 99
°F (Initial)
Evaporation Rate >1
Flash Point (TCC) None
Specific Gravity 1.35
Vapor Pressure @68
°F 165 mmHg
Solubility in Water Negligible
Dielectric Breakdown
(ASTM D-877) 26 kV
VOC* Content: Aerosol
CARB 75%
SCAQMD 783 g/L
Federal 15%
RoHS Compliant
Shelflife 5 years
*Volatile Organic Compound (VOC) information is calculated on a
weight basis using the VOC definition of California Air Resources
Board (CARB) Consumer Product Regulations, South Coast Air
Quality Management District (SCAQMD) Rule 102 and the Federal
definition published in 40 CFR 51.100(s).
COMPATIBILITY
Electro-Wash

PN New & Improved!
Cleaner Degreaser has excellent
compatibility with most materials used in the
electronics industry. With any cleaning
agent compatibility with substrate should be
determined on a non-critical area prior to
use.
TDS # 1678
CHEMTRONICS
Technical Data Sheet
Electro-Wash

PN New & Improved!
Cleaner Degreaser