Chemtronics Flux-Off No Clean Plus ES896B - Manual

PRODUCT DESCRIPTION
Flux-Off

No Clean “Plus” Flux Remover is
an extra strength solvent that removes heavy
and encrusted flux deposits. This high
pressure aerosol or bulk liquid penetrates
quickly to remove all types of flux, oxide
particles, dust, grease and oil, then evaporates
quickly leaving no residues.
 Powerful cleaner removes R, RA, RMA,
and No Clean fluxes
 Non-corrosive, safe for metals
 Flammable
 Extra-strength
 Fast drying
 Removes encrusted, baked-on fluxes
 All-Way Spray valve - even sprays upside
down
 Available with BrushClean  System
TYPICAL APPLICATIONS
Flux-Off

No Clean “Plus” Flux Remover
effectively cleans flux residues from:
 Chip Carriers
 Heat Sinks
 Metal Housings and Chassis
 Printed Circuit Boards
 Plugs
 Relays and Contacts
 Sockets
 Surface Mount Device Pads
 Solenoids
 Switches
TYPICAL PRODUCT DATA AND
PHYSICAL PROPERTIES
Flash Point -20
°F
Evaporation Rate >1
(butyl acetate=1)
Specific Gravity 0.706
Appearance Clear, Colorless Liquid
Odor Ethereal
Solubility in Water Negligible
Kauri-Butanol
(KB) Number
86
Shelflife 5 years
COMPATIBILITY
Flux-Off

No Clean “Plus” Flux Remover,
like any cleaner, should be tested on a non-
critical area to determine plastics
compatibility prior to use. Not recommended
for ABS, acrylics, polycarbonates,
polystyrenes and PVC.
TDS # 1696
CHEMTRONICS
Technical Data Sheet
Flux-Off

No Clean “Plus”
Flux Remover