COBY electronic CX-166 - Manual (Page 10)

10
AUXILIARY (AUX) MODE
Set the Mode knob to the AUX position to listen to external audio devices connected
through the 3.5mm Auxiliary Stereo Line-In jack.
Use a 3.5mm Male-to-Male Stereo cable (not included) to connect any external audio
device with a 3.5mm Headphone or Line-Out jack to the AUX IN jack on the rear panel of
the stereo.
Start playback on the external audio device. Adjust the volume on the audio device (do not
set the volume too high to avoid distortion). You may also adjust the volume on the CX-166.
To control playback function, use the controls provided by the external audio device.
1.
2.
3.