Cisco 1701 - Manual (Page 6)

Appendix C Installing and Upgrading Memory and Virtual Private Network Modules
Installing a VPN Module
C-6
Cisco 1701 ADSL Security Access Router Hardware Installation Guide
OL-3954-02
Installing a VPN Module
Follow the steps in this section to install a VPN module.
Step 1 Install the two standoffs on the module, as shown in Figure C-4 .
Figure C-4 Installing the Standoffs on the VPN Module
Screw Screw Standoff
Standoff is installed
into the hole just behind
the large connector.
46084