Chemtronics Pow-R-Wash NR ES1613 - Manual

PRODUCT DESCRIPTION
The Pow-R-Wash

NR Contact Cleaner is a
nonflammable electronics contact cleaner
that quickly removes soils, oxides, and other
contaminates from metal electrical contacts.
This high pressure solvent system is
engineered to restore and improve electrical
continuity on all types of contacts,
connectors, and switches.
 Same great features as original
formulation but without HCFC-141b
 Removes encrusted oxides, dirt, grease
and other contaminants
 Nonflammable
 Penetrates to clean hard to reach areas
 Evaporates quickly
 Leaves no residues
 Noncorrosive; safe for sensitive metals
 Available with All-Way Spray
TYPICAL APPLICATIONS
Pow-R-Wash

NR Contact Cleaner cleans
and deoxidizes:
 Circuit Breakers
 Monitors and Generators
 Plugs and Sockets
 Potentiometers
 Printed Circuit Boards
 Relay and Contacts
 Selector Switches
 Solenoids
 Switching Devices
TYPICAL PRODUCT DATA AND
PHYSICAL PROPERTIES
Boiling Point 156
° F (Initial)
Evaporation Rate (butyl acetate=1) >1
Flash Point (TCC) None
Specific Gravity 1.35
Vapor Pressure @68
°F 112 mmHg
Solubility in Water Negligible
Dielectric Breakdown
(ASTM D-877) 23.5 kV
Kauri-Butanol
(KB) Number 125
VOC* Content: Aerosol
CARB 75%
SCAQMD 830 g/L
Federal 42%
RoHS Compliant
Shelflife 5 years
*Volatile Organic Compound (VOC) information is calculated on a
weight basis using the VOC definition of California Air Resources
Board (CARB) Consumer Product Regulations, South Coast Air
Quality Management District (SCAQMD) Rule 102 and the Federal
definition published in 40 CFR 51.100(s).
COMPATIBILITY
Pow-R-Wash

NR is generally compatible
with most materials used printed circuit
board fabrication except acrylics, ABS
resins, polycarbonates and polystyrenes. As
with any cleaning agent, solvent/component
compatibility must be determined on a non-
critical area prior to use
.
TDS # 1613
CHEMTRONICS
Technical Data Sheet
Pow-R-Wash
 NR Contact Cleaner