Chemtronics Sealed Foam Swabs 44070 - Manual

COVENTRY

Clean Room Products
Division of Chemtronics
44070 Conical Foam Swabs
TECHNICAL HOT LINE 1-800-TECH-401
TDS # 44070
PRODUCT DESCRIPTION
The 44070 Conical Sealed Foam Swabs are
constructed from reticulated 100 pores per inch
medical grade polyurethane foam which features the
best open cell structure, providing excellent particle
entrapment characteristics. The head is thermally
bonded to the handle without using adhesives. The
conical head tapers to a fine point for precision
cleaning of hard to reach areas.
 Traps surface particles while cleaning
 Fiberless construction does not generate
loose fibers or particles
 No adhesives or binders are used in the
construction
 Good for tight tolerance work
TYPICAL APPLICATIONS
Conical Sealed Foam
Swabs can be used for:
 Removing Contamination from Disk Drives
 Micro Mechanical Cleaning
 Cleaning & Removing Excess Adhesives &
Chemical Residues
 Remove flux residue from Printed Circuit Boards
COMPATIBILITY
Polyurethane Foam Heads are compatible with most
common solvents such as isopropyl alcohol and
methanol. Not recommended for use with ketones
such as acetone or methyl ethyl ketone.
Polypropylene, ESD Handles are compatible with
most common solvents and dilute or weak acids.
AVAILABILITY
44070
3.2”(8.0 cm)Polypropylene Handle,
0 .13" (3.3 mm), Conical Foam Head
44070ESD
3.2"(8.0 cm) ESD Handle,
0 .13" (3.3 mm), Conical Foam Head
.
COVENTRY™ Clean Room Products
Division of Chemtronics
8125 Cobb Center Drive
Kennesaw, GA 30152 USA
1-770-424-4888 REV. A (08/13)