Chemtronics VIS 300 Video Inspection Scope VIS 300B Kit - Manual (Page 5)

4
The VIS 300 includes a bright 3.5-inch LCD display and precision optics to provide an unmatched Field of
View (FOV) of 630µm by 440µm. Extended-use Lithium Ion batteries provide 8-10 hours of continuous use.
The included “smart AC charger” charges the battery in 3 hours and allows the unit to continue to operate
during the charging cycle. The VIS 300 comes with two user-selected adapter tips. Optional tips for most
commonly used connectors are available.
The VIS 300 monitor is supplied in a padded nylon case. Both the probe and monitor are transported in a
hard carry case that also includes the charger, extra adapter tips and cleaning aids.
For digital archiving of the connector polish, ODM offers the VCM 410 Video Capture Module, an accessory
that allows quick storage of the image to any Windows-based computer. In addition, the VIS 300 hand-held
display may be equipped with the video capture module internal to the monitor display case. Please call
ODM to learn more of this feature.
Please refer to Figure 1 below for reference to control features and buttons:
1. Adapter Tip Ring – Adapter tips allow the VIS 300 to access either the bulkhead panel
connector or the actual connector end if access is available. The VIS 300 is supplied with two
adapters, the SC bulkhead adapter and a 2.5mm universal adapter tip to allow inspection of any
2.5 mm ferrule connector (SC, ST or FC).