Pro-Link Jet Force Wasp & Hornet Killer - Claire XA002 User Manual

Pro-Link For Home

Advertising
background image

M A T E R I A L S A F E T Y D A T A S H E E T MSDS

Page
1

ITEM NUMBER: C-005 - XA002

VERSION 5 EFFECTIVE DATE: 03/09/04 SUPERCEDES: 06/04/01 PREPARED BY: Denese Deeds

Section(s) Revised: HMIS, II, IV, IX
IDENTITY (As Used On Label and List): Jet Force Wasp & Hornet Killer

Emergency Medical Telephone Number 1-800/228-5635 (24 HRS) Outside the U.S.A. Call 651/632-9275
PRODUCT HAZARD RATINGS (HMIS): - Health = ,2* Fire = 4, Reactivity = 1, Protective Equipment = B
(Rating Legend: - 4 = Extreme, 3 = Serious, 2 = Moderate, 1 = Slight, 0 = Minimal, * = Chronic Hazard)

SECTION I

CLAIRE MANUFACTURING TELEPHONE NUMBER FOR INFORMATION: 1-800-252-4731
500 VISTA AVE.
ADDISON, IL 60101 DATE PRINTED: 3/17/04

NAME OF PREPARER: Ron Cepa

SECTION II - HAZARDOUS INGREDIENTS/IDENTITY INFORMATION

Chemical Names CAS # SARA ACGIH OSHA % By Wt.
SEC 313 TLV-TWA/STEL PEL-TWA/STEL
Isoparaffinic Hydrocarbon

64742-47-8

No

NE/NE

NE/NE

80-90

Isopropanol

67-63-0

No

200ppm/400 ppm

400 ppm/NE

5-10

Carbon Dioxide

124-38-9

No

5000 ppm/30,000 ppm

5000 ppm/NE

1-5

Tetramethrin (1Cyclohexene-1,2-
dicarboximido) methyl 2,2-
dimethyl-3-(2-methylpropenyl)
cyclopropane carboxylate)

7696-12-0 Yes

NE/NE

NE/Ne

0.200

d-Phenothrin (3-Phenoxybenzyl-
(1RS, 3RS: 1RS, 3SR) 2,2-
dimethyl-3-(2-methylprop-1-
enyl) cyclopropane carboxylate

26002-80-2 Yes

NE/NE

NE/NE

0.125


Balance of ingredients are non-hazardous or below reportable levels.

SECTION III - PHYSICAL CHARACTERISTICS

Boiling Point: NA Vapor Pressure (psig): 108 @ 130F / 84 @ 70F Specific Gravity – calculated (H20=1):
0.8136 pH: NA Solubility/Water: Slight Vapor Density (AIR=1): >1
Evaporation Rate (Ether=1): ND Appearance and Odor: Aerosol spray with solvent odor.

SECTION IV - FIRE AND EXPLOSION HAZARD DATA

Aerosol Flammability: Product is to be labeled as flammable as described in 40 CFR 156.78.
Flashpoint: None (Propellant); >183F (Concentrate)
Flammable Limits - % Volume In Air: LEL: 0.5 (isoparaffinic hydrocarbon) UEL: 12.7 (isopropanol)
Extinguishing Media: Carbon dioxide, water spray, foam, or dry chemical.
Special Fire Fighting Procedures: Containers should be cooled with water to prevent vapor pressure build up.
Use equipment or shielding, as required, to protect personnel from bursting, rupturing or venting containers.
Unusual Fire and Explosion Hazards: Fire fighters and others who may be exposed to the products of combustion
should be equipped with NIOSH-approved positive pressure self-contained breathing apparatus (SCBA) and full
protection clothing. At elevated temperatures (over 54C-130F) containers exposed to direct flame or heat contact
should be cooled with water to prevent weakening of container structure.

SECTION V - REACTIVITY DATA

Stability: Stable Hazardous Polymerization: NA
Incompatibility (Materials to Avoid): Oxidizing agents, acids, bases.
Hazardous Decomposition Products: Carbon monoxide, carbon dioxide. Conditions to Avoid: Keep away from heat,
sparks, flames and electric arcs. Dropping of containers may cause bursting.

SECTION VI - HEALTH HAZARD DATA

Route(s) of Entry - Inhalation: X Eyes: X Skin: X Ingestion:
HAZARDS IDENTIFICATION: EYES: May cause moderate irritation. Can cause burning sensation, tearing, and redness.
SKIN: May cause mild irritation. Harmful if absorbed through the skin. INHALATION: Prolonged exposure can be
irritating to eyes, nose and respiratory tract. Can cause dizziness, headaches and incoordination. Under misuse
or intentional misuse, product may cause asphyxiation. INGESTION: Exposure by ingestion is unlikely since an
aerosol, but if occurs: Irritating to the mouth, throat and stomach. May cause nervous system effects such as
fatigue, dizziness, headache, tremors and unconsciousness. Possible aspiration hazard. May cause inflammation of
the lungs.
AGGRAVATED MEDICAL CONDITIONS: May aggravate pre-existing eye, skin, respiratory conditions.
CHRONIC EFFECTS/TARGET ORGANS: Nervous system.
EMERGENCY AND FIRST AID PROCEDURES: EYES: Immediately flush with plenty of water for 15-20 minutes. Remove
contact Lenses, if present, after the first 5 minutes, then continue rinsing eyes. Get prompt medical attention.

Advertising