Canon D300 - Manual (Page 32)

2-20
2
In
st
allin
g C
anon
A
d
vanced
Rast
er P
rint
ing S
yst
em
■ ■ ■ ■ Windows 2000 Plug and Play Windows 2000 Plug and Play Windows 2000 Plug and Play Windows 2000 Plug and Play
The following is the installation procedure of Plug and Play, under Windows 2000.
Before you install the software, make sure you do the following:
• Connect the machine to your computer ( Setup Sheet).
• Turn on the machine ( Setup Sheet).
• Start up Windows 2000.
Windows 2000 Windows 2000 Windows 2000 Windows 2000
1 Log on as member of Administrators. The full control access right for the printer is necessary
for the installation of CARPS.
2 Plug and Play is being carried out and the USB class driver, USB Printing Support, is
automatically detected and installed.
3 The Found New Hardware Wizard dialog box appears. Click Next.
Select Search for a suitable driver for my device (recommended) in the Found New
Hardware Wizard dialog box  click Next.
NOTE
“Unknown” may be displayed as the name of the device.