CREATIVE Digital Wireless Gaming Headset HS-1200 - Manual (Page 11)

9
• Do NOT operate the Digital Wireless headset system with other power adaptors.
Contact Creative Customer Support should you need a replacement power adaptor.
• Do not attempt to service any part of the digital wireless headset / USB transceiver yourself
as opening or removing covers may exposed you to dangerous voltage or other hazards.
Refer all servicing to qualified service personnel.
technical Specifications
• Digital Wireless Technology: Proprietary 2.4 GHz Radio Frequency for advanced 2-way
transmission.
• Range: Up to 22 meters * (72 feet *) in a typical environment.
• Listen Time (per charge): Approximately 8 hours.
• Standby time: Up to 3 months.
• Charging time: 2.5 hours
• Charging Method: Through USB powered Transceiver DC out.
• Battery type: Lithium polymer
• Low battery indication: 3 beeps repeated every 5 seconds.
• Connectivity: USB 1.1
• USB Cable length: 80 cm/2.6 feet.
• Net Weight (without packaging):
USB Transceiver – 60 g
Digital Wireless Headset – 155 g
Headphone
• Driver: 40mm Neodymium magnet.
• Frequency Response: 20 Hz ~ 20 kHz.
• Impedance: 32 ohm
Microphone
• Type: Noise cancelling condenser
• Frequency Response: 100 Hz-16 kHz
• Impedance: <10 kohm
System requirement
• Intel ® Pentium ® 4 1.6 GHz, AMD ® Athlon XP 2000+ processor or faster
(Pentium ® 4 2.2 GHz, AMD ® Athlon XP 2400+ processor or faster recommended)
• Intel ® , AMD ® or 100% compatible motherboard chipset
• Microsoft ® Windows Vista TM 32-bit or 64-bit, Windows ® XP Professional x64 Edition,
Windows ® XP Service Pack 2 (SP2)
• 512 MB RAM
• 600 MB of free hard disk space
• CD/DVD-ROM drive
• One available USB port (for the USB transceiver)
• Installed and launched Windows Live
TM Messenger or MSN ® Messenger to answer / end
calls. Skype TM requires manual configuration.