Park Tool Truing Stand Base - Manual

Park Tool Co. 5115 Hadley Ave. N., St. Paul, MN 55128 (USA) www.parktool.com
TSB-2 Tilting Truing Stand Base
The TSB-2 Tilting Truing Stand
Base is designed specifically
to fit the TS-2 and TS-2.2
Professional Wheel Truing
Stands. It allows the truing
stand to be tilted forward
or backward 20 degrees for
comfortable use at any bench
height. The handy bins at the
front of the TSB-2 are de-
signed to hold Park Tool Spoke
Wrenches and other small
items, such as spoke nipples.
Part No. Description Qty.
260 Tray 1
260-1 Square hole washer 3
260-2 Carriage bolt 3/8 x 16 x 11 - 1/8 1
260-3 Cap screw 10 x 20mm 2
260-4 Knob 1
260-L Left hand end cap 1
260-R Right hand end cap 1
260-5 Adaptor shim 2
TSB-2 Part Numbers
1
2
3
4
5
6
7
8
© 2014 Park Tool Co.
PARK TOOL® and the color BLUE are registered trademarks of Park Tool Co.