Compaq AA-Q88CE-TE - Manual (Page 112)

CALL RTR_REQUEST_INFO
Qualifiers
/CHANNEL_NAME=channel_name
/CHANNEL_NAME=RTR$DEFAULT_CHANNEL
Specifies the channel for which the operation is to be performed.
The command server uses a combination of the channel_name and the window
from which the call was issued to uniquely identify which channel to use.
channel_name is not case sensitive.
The default channel name is RTR$DEFAULT_CHANNEL.
/CLUSTER
/NOCLUSTER (D)
Specifies that the command is executed on all the nodes in the cluster.
If neither /NODE nor /CLUSTER is specified then the command is executed on the
nodes specified by the latest SET ENVIRONMENT command. If no SET ENVIRONMENT
command has been entered then the command is executed only on the node where
the command was issued.
Note: In environments that do not support clustering, use of the /CLUSTER
qualifier will cause the relevant command to be executed on the local node only.
/GETITM=item-name[,item-name...]
No default
Specifies the getitm parameter in the rtr_request_info( ) call.
/INFCLA=infoclass
No default
Specifies the infcla parameter in the rtr_request_info( ) call.
/NODE[=node-list]
/NODE=default-node-list (D)
Specifies that the command is executed on all nodes specified in node-list . If
node-list is omitted then the command is executed only on the node where the
command was issued.
/OUTPUT[=file-spec]
/OUTPUT=stdout (D)
Specifies that the resulting information is written to the file file-spec . If
/OUTPUT or file-spec is omitted then the standard or default output is used.
/SELITM=item-name
No default
Specifies the selitm parameter in the rtr_request_info( ) call.
/SELVAL=item-value
No default
Specifies the selval parameter in the rtr_request_info( ) call.
6–36 RTR Command Line Interface