Canon A510 - Manual (Page 52)

50
Shooting – The Basics
Shooting
Images can be shot in the following 2
sequences in Stitch Assist mode.
1
Turn the Shooting mode dial to
.
z The LCD monitor will turn on.
2
Select the
shooting sequence
using the
or
button and press
the SET button.
z The shooting sequence is
set.
z To shoot landscapes, swivel (pan) the
camera around its own vertical axis.
z To shoot close-ups, slide the camera over
the subject, keeping it parallel to the subject
as you move it.
Left Right Left to right horizontally
Left Right Right to left horizontally
z You can also press the shutter button directly
to shoot without pressing the SET button.
3
Shoot the first image.
z The exposure and white balance settings are
set and locked with the first image.
4
Compose and
shoot the second
image so that it
overlaps the first.
z Minor discrepancies in
the overlapping portions
can be corrected when
the images are stitched
together.
z Use the or button to check or retake the
recorded images.
5
Use the same procedures to shoot
the remaining images.
z A maximum of 26 images can be recorded.
6 Press the SET button after the last
shot.
Sequence