Etting up your phone – Axesstel P1900B User Manual
Page 8
1. Mark two mounting hole locations on the wall.
2. Drill two holes at the marked location.
3. Attach the wall mountable bracket, if needed.
4. Tighten the screws firmly.
5. Plug in power connector and route the cords in the groove on the back of the phone.
6. Insert the wall mount bracket hook into the holes on the back of the phone.
Push the phone against the wall and pull it down firmly until locked.
7. Screw the antenna into antenna connector.
8. Pull out the handset hanger and reinsert it in the reverse direction, so that the receiver
can be hanged.
NOTE : The input voltage and the shape of the plug may vary from country to
country. The input and output voltages are indicated on the adaptor.
(Input: AC 100~240V, 50~60Hz, Output: DC 9V, 1A).
ETTING UP YOUR PHONE
Wall mount installation
S
7
ON
OFF
AXW-P450 / P450R / P450B
AXW-P800 / P800R / P800B
AXW-P1900 / P1900R / P1900B
Fixed Wireless Phone
Connecting the World Now