Rear panel description, Manual – Rane MP 2S User Manual

Page 5

Advertising
background image

Manual-

REAR PANEL DESCRIPTION

1

PHONO/LINE 1 & 2 INPUTS: are switchable from a PHONO (RIAA) stage for magnetic cartridges (PHONO, switch in) to a

LINE level Input suitable for any line level device such as a CD player (LINE, switch out). The PHONO GROUND screw con-

nects to those extra green wires coming out of the turntables.

2

LINE 1 & 2 INPUTS:

connect to stereo sources such as CD players or any line-level device. L1 and L2 may be assigned to Pro-

gram A or Program B via the front panel INPUT switches.

3

MIC Input: accepts a ¼" balanced (TRS) or unbalanced (TS) microphone cable, controlled by the MIC LEVEL control on the

front panel.

4

HOUSE OUTPUT:

The front panel HOUSE LEVEL control affects the volume at this Output. These balanced ¼" TRS (tip-

ring-sleeve) Outputs connect to a balanced equalizer or amplifier. Though not recommended, unbalanced ¼" TS (tip-sleeve)

cables may be used for short runs (under 3 meters [10 feet]) to an amplifier with unbalanced inputs. See the RaneNote “Sound

System Interconnection” for wiring recommendations.

5

AUX OUTPUT:

This delivers the same signal as the HOUSE OUTPUT, but has its own LEVEL control on the rear panel. This

Output is not affected by the front panel HOUSE LEVEL control. These balanced ¼" TRS (tip-ring-sleeve) Outputs connect to a

balanced equalizer or amplifier (for a possible second listening zone) and follow the same interconnection rules as above.

6

TAPE OUTPUT: These line-level RCA Outputs are intended for use with a tape recorder, but not necessarily restricted to that

purpose. Be creative! These Outputs are not affected by the HOUSE LEVEL or AUX LEVEL controls.

7

MIC to TAPE switch: In the YES position the Mic signal along with the Program Inputs are routed to the TAPE OUTPUT.

In the NO position only the Program Inputs appear at the TAPE OUTPUT.

8

Universal Voltage Input: via a miniature IEC 60320 C6 appliance inlet. With the right cord, you can plug anywhere in the

world between 100 and 240 VAC. This mates with an IEC 60320 C5 line cord (USA domestic). Do not lift the ground connec-

tion!

RIGHT

LEFT

RIGHT

LEFT

LEVEL

YES

R

R

L

L

R

L

NO

PHONO

LINE

PHONO GROUND

HOUSE

AUX

TAPE OUTPUT

L2

P2

L1

P1

MIC TO TAPE

MIC

BALANCED OUTPUTS: TIP = , RING = , SLEEVE = SIGNAL GROUND

BALANCED MIC INPUT

PHONO

LINE

MP 2S

100-240 V

50/60 Hz 7 WATTS

COMMERCIAL AUDIO

EQUIPMENT 24TJ

R

ACN 001 345 482

RANE CORP. MADE IN U.S.A.

This device complies with Part

15 of the FCC Rules. Operation

is subject to the following two

conditions:

(1) this device may not cause

harmful interference, and

(2) this device must accept any

interference received, including

interference that may cause

undesired operation.

8

3

6

1

4

5

7

2

Advertising