Rane SEQ 30L (2003 version) - Manual

Manual-1
QUICK START
If this is your first equalizer, please do yourself and
your speakers a favor and read at least the first five
pages. “An ounce of prevention...,” and all that.
The SEQ 30L is a stereo equalizer, so adjusting
any slider affects both channels simultaneously. Begin
by setting all sliders to their center detent (0 dB), and
the INPUT LEVEL to its center detent (0 dB). Try to
make more cuts than boosts. After equalizing, use the
EQ switch to compare equalized and non-equalized
signal. While EQ is switched to ACTIVE (out), adjust
the INPUT LEVEL to the same level as when EQ is
switched to BYPASS (in).
You may use either the XLR or ¼" connectors for
Inputs or Outputs. Connect only one INPUT type per
channel. The XLR and ¼" TRS inputs do not sum.
You may, however, use both types of OUTPUTS
simultaneously if desired.
WEAR PARTS: This product contains no wear parts.
OPERATORS MANUAL SEQ 30L
STEREO GRAPHIC EQUALIZER