OFNA Racing Blazer SST - Manual (Page 26)

( Neutral Position ) ( Braking Position ) ( Full Throttle Position )
Step 1 Step 2
22
use the screw
provided With your radio.
Connect the air filter
connector to the
carburetor.
#265
Air Filter
Cap
#265A
Air Filter
Sponge
#265
Air Filter
Mount
#194
Air Filter
Connector
A-81
Nylon Strap
(Small)
Apply filter oil to the
sponge before use.
3x3mm
Set Screw
3x3mm
Set Screw
#158
Alum
Stopper USING BREAK ADJUST NUT
Loose
Tighten
More Brake Less Brake
Engine at idle Engine at idle
Engine at full
throttle
Brake is not on
Brake is not on
Brake Adjust Nut
Brake is on
Tighten or loose the adjuster nut will
change the brake.
ASSEMBLY OF THE BRAKE LINKAGE INTO BRAKE LEAVE
ASSEMBLY OF THE AIR FILTER
ALIGN THROTTLE SERVO AND BRAKE SAME AS SHOWN
..........X1 3x10mm
Hex Screw
3x10mm
Hex Screw
3x3mm
Set Screw ..........X1