OFNA Racing MBX R2 Plus - Manual (Page 33)

0 10 20 30 40 50
mm
#30402
3 X 30mm
Tie Rod
#30410
6mm
Ball & Socket End
ASSEMBLY OF THE FRONT STEERING ROD
* To the steering
servo saver.
3x12mm
Screw
3x12mm
Screw
* Align the steering servo as shown.
20mm
3 x 12mm Screw
#30410
6mm
Ball & Socket End
#30410
6mm
Ball & Socket End
#30410
6mm
Ball & Socket End
ALIGN THROTTLE SERVO AND BRAKE SAME AS SHOWN
Brake is not on
Engine at idle
( Neutral Position )
Brake is on
Brake Adjust Nut
( Braking Position )
Brake is not on
Engine at full throttle
( Full Throttle Position ) Less Brake
More Brake
Tighten Loose
* Tighten or loose the adjuster nut
will change the brake.