OFNA Racing Ultra LX 2 - Manual (Page 28)

22
Assemble both left and right sides.
53 WASH THE INSIDE OF THE BODY SHELL
40550
Wheel Nut
.....x4
40550
To tighten the Wheel Nut you can also
use 17mm Wheel Nut Tool.(10799)
52 MAKING HOLES AND CUTTING ON THE BODY SHELL
51 ASSEMBLY OF THE TIRE ONTO THE FRONT
KNUCKLE AND REAR HUB
Body ReameR (not included)
10806 BLACK
10807 BRUE
Make 8mm holes on the body shell as shown. Cut the body shelll as shown.
Step 1
Step 2
Wash the inside of the body shell with mild detergent,
and then rinse and dry thoroughly.
Step 1 Step 2
30683 PRINTED ORG/WHITE
30682 CLEAR W/MASK