Cleaning, maintenance, and lubrication, Safet y o pera tion m aintenan c e setup – Chicago Electric 67119 User Manual
Page 12
Page 12
For technical questions, please call 1-800-444-3353.
Item 67119
SAFET
y
O
PERA
TION
M
AINTENAN
c
E
SETUP
Maintenance and Servicing
Procedures not specifically explained in this manual must
be performed only by a qualified technician.
TO PREVENT SERIOUS INJURy
TO PREVENT SERIOUS INJUR
TO PREVENT SERIOUS INJUR FROM A
yy
ccIDENTAL OPERATION:
Make sure that the Trigger is in the off-position and unplug the tool from its
electrical outlet before performing any procedure in this section.
TO PREVENT SERIOUS INJURy
TO PREVENT SERIOUS INJUR
TO PREVENT SERIOUS INJUR FROM TOOL FAILURE:
yy
Do not use damaged equipment. If abnormal noise or vibration
occurs, have the problem corrected before further use.
cleaning, Maintenance, and Lubrication
1.
BEFORE EAcH USE, inspect the general
condition of the tool. Check for:
• loose hardware,
• misalignment or binding of moving parts,
• damaged cord/electrical wiring,
• cracked or broken parts, and
• any other condition that may
affect its safe operation.
2.
AFTER USE, wipe external surfaces
of the tool with clean cloth.
3. Do not use any abrasive or solvent-based cleaners.
4. Regularly clean all ventilation openings by
periodically brushing with a soft brush and/
or blowing clear with compressed air.
5. For blade changing instructions
see Tool Set Up on page 9.
6.
WARNING! If the supply cord of this
power tool is damaged, it must be replaced
only by a qualified service technician.