Hexin Technology HXSP-G703 Balun G.703 75-ohm to 120-ohm Female BNC to RJ-45 Converter - Manual

Http://www.hexin-technology.com/
HXSP-G703 Balun G.703 75-ohm to 120-ohm
Female BNC to RJ-45
1. Description of Product:
HXSP-G703 is an impedance converter from balance to imbalance. It settles down the
signal conversion from 75 ohm copper axis cable to 120 ohm twisted pair wire.
By G703 converter, it is quick and easy to compete the signal communication between
regular 120 ohm twisted pair wire and 75 ohm copper axis cable.
2. Specification Sheet
[Dimension]
A-20MM B-78MM C-42MM D-20MM E-65MM
[Wiring Diagram]
3. Electrical Characters
Impedance: 75 ohm unbalanced coaxial to 120 ohm balanced twisted pair
Bit Rates: 2.048Mbit/s as ITU-T Recommendation G.703 Line Code
Return Loss: 2.048Mbit/s as per G.703 requirements
Insertion Loss: <0.9dB from 51kHz to 51.55MHz
Cross Talk: >60dB from 51kHz to 51.55MHz between 2 baluns mounted 15mm
apart
Pulse Shape: 2.048Mbit/s as per G.703
Signal Levels: 2.37V nominal peak voltage for 2.048Mbit/s at the coaxial end
Isolation Voltage: 250VDC for 1 minute between windings
Pulse Test: 3kV as per ITU-T, K.17
Dimensions: 78mm x 42mm x 20.5 mm
4. Connection:
COAXIAL CONNECTOR (75 ohm): BNC Female To IEC169-8
RJ45 Jack (120 ohm): TWISTED PAIR CABLE to standard
RJ45 Pin Out
Pin Out Table
Signal
RJ-45
Description
DTE
RJ45 BNC
Description
DTE
BNC
Tx + Receive Input
Negative
1 Receive Input Tip
Tx - Receive Input
Positive
2 Receive
Ground
Ring
Rx + Transmit
Output
Negative
4 Transmit
Output
Tip
Rx - Transmit
Output
Positive
5 Transmit
Ground
Ring