Chamberlain PIR2300R - Manual (Page 2)

2
Step 5
Programming PIR Motion
Sensor to Base Station
Test PIR Motion Sensor by waving hand in front of
sensor. Test light should flash. Secure cover with the
smallest screws.
Step 3
Insert battery pack facing away from circuit board and
attach cover.
NOTE: Ensure the batteries do not touch the circuit
board and the antenna and battery wires are not
pinched.
Step 4
B Within 5 seconds, wave hand in front of PIR Motion
Sensor. Test light will illuminate and Base Station
will buzz.
A
B
A Ensure Base
Station and PIR
Motion Sensor are
in close proximity
to each other.
Press and release
learn button on
Base Station.
Buzzer will sound.
Step 6
PIR Motion Sensor Installation
Mount PIR Motion Sensor
horizontally on solid surface a few
feet off the ground and within 900'
of Base Station (rotate sensor to access screw
holes). Unit should be able to swivel as needed.
Attach sun/rain shield.
NOTE: Keep PIR Motion Sensor antenna away from
metal objects. Do not mount PIR Motion Sensor in
direct sunlight, near moving tree branches, or in the
path of a sprinkler system.