Hexin Technology HXVB-300R Active PoE UTP Data + Video Balun Receiver - Manual (Page 9)

PoE Power/Video/Data UTP Transceiver User Manual
4. What cause about image twist and wobble
UTP RJ45 connector order mistake, please as RJ45 jack instruction connect.
5. The image to bright and white twist
The video signal too strong, please adjust sharpness DIP switch and birghtness of PVD receiver, and set to lower signal grade.
6. PoE PVD Transmitter can't power Remote camera
Check power of remote camera whether over the power corresponding to the proper distance; Check input voltage of PoE PVD receiver
whether in required range;Shut the camera power and reconnect it, to make sure that transceiver not in limited protection status; Ensure the
UTP RJ45 connector in right order, than reconnect Rj45 jack and Rj45 modular plugs.