V.I.O. POV.HD Quick Start Guide - Manual (Page 2)

RECORDING OPTIONS: CLIP, LOOP, LOOP & FORWARD, OR STILL PHOTO
POV.HD has 4 recording methods: Clip, Loop, Loop & Forward, and Still Photo. See the User
Manual for more complete information about recording methods.
TO RECORD IN LOOP MODE
TO RECORD IN LOOP & FORWARD MODE
Clip records video like a standard video recorder. Once you start recording, video is captured
continuously until you stop recording or the SD card is full.
Loop records a short clip every time you press TAG (or REC/TAG on the remote). The saved loop
includes action immediately before you press TAG, as well as action immediately following.
Loop & Forward records no video until you press TAG (or REC/TAG on the remote) for the first
time. Then a loop is captured and all action following that first TAG is captured as well.
Still Photo Mode captures digital photos as JPEG's.
Use the settings to set Recording Method to Loop & Forward, and set your desired Record
Loop Time.
Press REC to enter Record Standby mode. You should see "Standby" in the upper left of the LCD.
Press REC again when you're ready to roll.
When you want to start actually capturing video, press TAG on the recorder or REC/TAG on the
remote. From this point the recorder will capture video continuously until you stop recording.
While in Loop & Forward mode, you can tag the video using TAG or TAG/REC on the remote just
as you would in Clip mode.
Press REC on the recorder (or STOP on the remote) to stop recording. •
•
•
•
•
•
Set Recording Method to Loop, and set your desired Record Loop Time.
Press REC to enter Record Standby mode. You should see "Standby" in the upper left of the LCD.
Press REC again or TAG/REC on the remote when you're ready to roll.
To save a loop, press TAG on the recorder or REC/TAG on the remote. Each time you
press TAG or REC/TAG you save another loop.
Press REC on the recorder or STOP on the remote to stop all recording. •
•
•
•
•
TO TAKE PICTURES IN STILL PHOTO MODE
IN-FIELD EDITING
The POV.HD includes in-field editing capability that is unique to the industry. Save Tags and
Compile Tags are built-in features that automatically perform the task of eliminating unwanted
footage from long clips, while preserving the original footage for more refined editing or archiving.
TO CREATE A SEPARATE CLIP FROM EACH TAG ON A CLIP
TO CREATE A HIGHLIGHT CLIP FROM A TAGGED CLIP
• In settings, select Compile Tags, and then select YES.
• When Compile Tags runs, the LCD will display its status.
• When Compile Tags has finished, the LCD displays "Compile Tags Complete".
• Press the Return soft key to return to the settings menus.
• NOTE: You cannot make highlight clips while recording video or uploading files.
To see all the POV.HD features and learn what they can do, see the POV.HD User Manual, available
for download at the V.I.O., Inc. web site, www.vio-inc.com .
Use the settings to set Recording Method to Still Photo. (See To Adjust POV.HD Settings.)
Press REC to go to Record mode. You should see "Still Photo" in the upper left of the LCD.
Press TAG or REC/TAG on the remote to take a still photo. You can take any number of photos,
up to the limit of the SD card installed in the recorder.
REMEMBER to change out of Still Photo before your next video recording session. •
•
•
In the settings, navigate to Save Tags, press Select, then select YES and press Save.
The LCD will display the status of Save Tags.
When Save Tags has finished, the LCD displays "Save Tags Complete".
The SD card will now contain the original tagged file or files and a separate clip for every tag in
the tagged file or files.
Press the Return soft key to return to the settings menus.
NOTE: You cannot use Save Tags while recording video or uploading files.
•
•
•
•
•
•
•
ORANGE=Booting Up
INDICATOR LIGHT
DARK=Off
GREEN=Standby
FLASHING RED=Recording
FLASHING ORANGE=
Warning/Alert Condition
LCD
S oft Key function appears
in the LCD above button
S oft Key function appears
in the LCD above button
S oft Key function appears
in the LCD above button
RECORD
SOFT KEY 1
PLAY/STOP
SOFT KEY 2
SOFT KEY 3
SETTINGS
POWER
MODE STATUS
RECORDING CLIP:
Red Recording Method
RECORD STANDBY:
White “Standby”
RECORDING METHOD
“Clip”
“Loop”
“Loop & Fwd”
“Still Photo”
SOFT KEY FUNCTION
Standby Clip 81 min
Key Lock
TIME STATUS
RECORDING CLIP:
Elapsed Record Time
RECORD STANDBY:
Estimated Available SD Card Time
POWER STATUS
Alert for low power condition
Play 21/33 00:04:39
Next Delete Previous
MODE STATUS
VIDEO SELECT
“Play”
Number/Total on SD Card
ID
PLAYBACK
“Play 1X”
“Play 2X”
“Play 4X”
TIME STATUS
VIDEO SELECT:
Length of Clip
PLAYBACK:
Elapsed Time
POWER STATUS
Shown briefly upon mode entry
Alert for low power condition