V.I.O. Adventure Cam User Manual
Page 13
Table of Contents
Welcome
Products
How To
Support
Notes
Support: Warranty/Returns
30-Day Return
Warranty
Lifetime Return
Welcome: A note from our President
Lithium Ion Battery
LUX
MD4 Extension
Mini DV (Digital Video)
Mount
Neutral Density Filter
NTSC (National Television Standards Committee)
PAL (Phase Alternation Line)
Sony Proprietary Cable
VCR/VTR mode
POV
RCA
Resolution
Products: Adventure Cam
3
Support: Glossary
Lens
12v (12 Volts)
A / V Input (Audio/Video)
AC (Alternating Current)
Adventure Cam
Camcorder
CCD (Charge Coupled Device)
Composite
DC (Direct Current)
Field of View
LANC (Lan-cee)
3.5mm Mini Plug
Products: Adventure Cam H2O
Products: S.C.O.U.T. Cam
Products: Adventure Cam II
Products: Mounts
Products: Power Sources
Products: Plug Types
Support: Cam Comparison
Support: Mounting Tips
Products: Lens and Filter Tool Kit
Products: Neutral Density Filters
Products: Lenses
How To: Change the Lenses
How To: Connect Cable to Cam
How To: General Connections
How To: Change the Neutral Density Filters
How To: Connect Cam to Television
How To: Connect Cam to Recording Device
How To: Connect LANC to Recording Device
How To: Connect Cam to Power Source
Viosport Cigarette Lighter
Your Adventure Cam runs on 12 volts of power.
Depending on conditions of use, the Viosport Battery Holder could give you up to 12 hours of run
time. In order to conserve battery power, unplug the Adventure Cam from the battery holder when
not in use.
How To: Connect Cam to Power Source
How To: Connect Cam to Power Source
1. Properly place 8 “AA” batteries into the battery
holder.
2. Plug the male power connector from the battery
holder into the female power connector on the
Viosport A/V Cable.
If desired, attach the Li-Ion battery to the bottom of your recording device with the tripod bolt
built in the battery pack.
In order to conserve the battery power, turn the power switch to the “OFF” position and unplug
the Viosport Adventure Cam from the battery when not in use.
Depending on conditions of use, the Viosport Rechargeable Battery could give you up to 6 hours
of run time. In order to conserve battery power, unplug the Adventure Cam from the battery
holder when not in use.
Use:
1. Plug the male power connector on the battery into
the female power connector on the Viosport A/V
Cable.
2. Turn the Power Switch to the “ON” position.
ON/OFF
Viosport Battery Holder
Viosport Battery Holder
The battery will take approximately 2.5 hours to charge.
Charging:
1. Push the CHECK button, located next to the 5-LED
fuel gauge (B). The number of lit LED lights indicates
the remaining power level in the battery from Low
(one LED) to High (five LED’s).
2. Turn the power switch to the “OFF” position (A).
3. Insert the output plug of the AC power adapter into
the charging unit and plug into an AC outlet. The
GREEN LED indicator on the charging unit will light
up to indicate it is powered properly and ready for use.
4. Plug the cable of charging unit into the socket of the
battery. The LED indicator on the charging unit will
turn RED to indicate the battery is receiving charge.
As soon as the battery is fully charged, the same LED
indicator will turn GREEN to indicate your battery is
fully charged and ready for use. Disconnect the
charger from the battery after the battery is charged.
Viosport Rechargeable Battery Pack
Viosport Rechargeable Battery Pack
B
A
12 | How To
Support: Customer Service
Phone
Postal Mail
Welcome: Cam Care & Safety Precautions
Viosport 12v Rechargeable Battery Pack
Viosport Helmet Cam
How To: Focus the Lens
Support: Toubleshooting
Support: Videography Tips