Pigtronix Tremvelope - Manual (Page 8)

Safety Precautions:
The safety precautions listed below are intended to ensure your safety
whenever you use the TREMVELOPE.
NEVER OPEN THE CASE – Never try to separate the two pieces of the
chassis from one another and/or modify the equipment. Opening this
device will effectively void the warranty.
STOP USE IN CASE OF PROBLEM – Stop using the equipment if ever you
should notice smoke or a strange odor coming from it.
Contact
[email protected] for service.
AVOID HIGH TEMPERATURES & HEAT BUILD UP – Never cover the power
supply with cloth or other objects. Built up heat creates a danger of
equipment deformation and fire. Do not expose the TREMVELOPE to
direct sunlight, heating devices, or other extreme temperatures.
USE SPECIFIED POWER ADAPTOR ONLY – Be sure to use only the 18-Volt DC
300mA Adapter that came with your Pigtronix TREMVELOPE.
DO NOT EXPOSE TO WATER/BEER – To reduce the risk of fire or electric
shock, do not expose your TREMVELOPE to rain or moisture. If water gets
inside the unit, turn off the power.
Final Notes:
Years of work have gone into making the TREMVELOPE Pedal possible. We
would like to thank the following people for their help along the way:
Howard Davis, Lisa Rickmers, the Bethke and Koltai families, Paul Schwartz
at Peekamoose Guitars, Jody at ANSIR music, Soulive & Lettuce, Greg
Tobler, Dave Burnett, Aaron Reed, Jer Coons, Dan Pavone, Ben Artes,
Steve Turnidge, Craig Anderton and B-Dawg.
Howard “Mick” Davis and David Koltai designed the Pigtronix
TREMVELOPE during 2010 in Brooklyn and Port Jefferson, NY.
We hope you enjoy your new TREMVELOPE pedal! Please check our
website, www.pigtronix.com or contact us at (631) 331-PIGS (7447) for the
latest information on new Pigtronix gear.
Dave Koltai & Brian Bethke
Pigtronix