EVH 5150III 212ST/112ST Speaker Enclosure User Manual

Page 4

Advertising
background image

4

EVH® 212ST / EVH® 112ST Loudspeaker Enclosures

Specifications

Your new EVH 212ST or EVH 112ST loudspeaker enclosure

delivers big, full tone with the EVH 5150 III 50W head or

other quality tube amplifier. Built to Edward Van Halen's

specifications, its features include:
• Premium 5/8" Birch Ply construction for resonant tone
• Celestion G12H 30W speakers for full bottom end and rich

highs

• Availible in Ivory or Black coverings

EVH 212ST Head Locking System

A special head-to-speaker cabinet locking system enables you

to use the EVH 212ST speaker cabinet in the tilt-back position

when coupled with the EVH 5150 III 50W head amplifier.
Loosen the two thumbscrews on the top of your EVH 212

speaker cabinet. Then, pull out the brackets on the bottom of

your EVH 5150 III 50W head and align the rear facing slots on

the brackets with the thumbscrews on the speaker cabinet.

Slide the head back so the brackets engage fully with the

thumbscrews. Tighten thumbscrews to ensure a secure and

vibration-free connection.

Speaker Connections

Use speaker cable (16-gauge minimum) with standard 1/4"

plugs to connect each EVH® enclosure to a 1/4" speaker output

jack on your amplifier.

∆ Caution: Only connect speakers that comply with your

amplifier's minimum impedance and maximum power output

specifications to prevent damage to your equipment.

∆ Caution: EVH® amplifiers and loudspeaker systems are

capable of producing very high sound pressure levels which

may cause temporary or permanent hearing damage. Use

care when setting and adjusting volume levels during use.

EVH® 212ST

EVH® 112ST

PART NUMBER:

2253101000 (Black)

2253100000 (Black)

2253101400 (Ivory)

2253100400 (Ivory)

DRIVERS:

Two 12" (30.5 cm)

One 12" (30.5 cm)

CABINET:

0.63" (16 mm) Birch ply

0.63" (16 mm) Birch ply

SENSITIVITY:

99dB, 1 Watt- 1 Meter

96dB, 1 Watt- 1 Meter

POWER HANDLING:

50 Watts

25 Watts

IMPEDANCE:

16Ω

16Ω

CONNECTIONS:

1/4" high current phone jack

1/4" high current phone jack

DIMENSIONS:

Height: 20 in (50.8 cm)

Height: 16.5 in (42.0 cm)

(with castors)

Width: 30.1 in (76.5 cm)

Width: 20 in (50.8 cm)

Depth: 14.0 in (35.6 cm)

Depth: 12.0 in (30.5 cm)

WEIGHT:

60 lb (27.2 kg)

32 lb (14.6 kg)

Product specifications are subject to change without notice.

Advertising