Belt Drives Ball Bearing Lockup Clutch - Manual

INSTALLATION FOR BDL BALL BEARING LOCK UP CLUTCH
BPP100-500-700
BPP-100 BDL pressure plate with 32
-3/8” chromium steel ball bearings and
special adjustment screw and nut .
Place BDL diaphragm over ball
bearings on pressure plate.
Place BDL retainer over diaphragm and
insert shoulder bolts.
Holding assembly with pressure
against the diaphragm so that the
ball bearings are secured, place
assembly on to clutch basket.
While firmly holding assembly
on clutch basket, locate holes in
the clutch hub and screw the
shoulder bolts in.
Tighten shoulder bolts down to
approx. 25 TO 30 foot pounds.
1