Belt Drives EVO-900 - Manual (Page 3)

5. Install the standoffs supplied using the
4-5/16-18 x 1-1/4 sockethead set screws. (Fig. 5)
Fig. 5
6. Install outboard support. (Fig. 6)
Fig. 6
7. Outboard support installed. (Fig. 7)
Fig. 7
8. Using the 4-5/16-18 x 1-1/4 buttonhead screws,
bolt out-board support to the standoffs. (Fig. 8)
Fig. 8
3