Sangean WFR-27C (V1) - Manual (Page 65)

64
GB
Setting the alarm clock - cont.
7-9
Enable:Once
Time: 07:30
Mode: Buzzer
Volume: 20
Save
Alarm 1
Enable:Once
Time: 07:30
Mode: DAB
Preset: Last listened
Volume: 20
Alarm 1
24-08-2010
07:30
Alarm1 date/time
Enable:Off
Time: 07:30
Mode: Buzzer
Volume: 20
Save
Alarm 1
Off
Daily
Once
Weekends
Weekdays
Alarm 1 frequency
Buzzer
Internet radio
DAB
FM
Alarm 1 mode
Last listened
1. Radio Luxembourg
2. Rlck Antenne
3. Absolute Radio
4. [Not set]
Alarm 1 preset
7.
8.
.
Rotate the Tuning Control Rotary to highlight 'Enable' and press the Tuning Control Rotary.
The display will show the Frequency options for the alarm. The alarm frequency options are as
follows:
'Off' - the alarm will be disabled
'Daily' - the alarm will sound everyday
'Once' - the alarm will sound once
'Weekends' - the alarm will sound only at weekends
'Weekdays' - the alarm will sound on weekdays only
Rotate the
Tuning Control Rotary to choose the required alarm frequency option. Choosing
Off will disable the alarm. Press the Tuning Control Rotary to confirm the selection. If you
choose to set the alarm to Once you will also need to set the date using the
Tuning Control
Rotary.
The alarm can be set to buzzer, Internet radio, DAB radio, FM radio. For whichever radio
mode is selected, the radio alarm may be set to any of the stations which have been stored
as presets or to the station most recently listened to. Rotate the
Tuning Control Rotary to
highlight the current 'Mode' option for the alarm, then press the Tuning Control Rotary if you
wish to change it. Rotate the Tuning Control Rotary to highlight either 'Buzzer' or the required
mode. Press the
Tuning Control Rotary to confirm the selection.
If setting the alarm to a radio option, rotate the Tuning Control Rotary to highlight the 'Preset:'
option then press the Tuning Control Rotary if you wish to change it. Choose from either the
radio station 'Last listened' to, or from the presets  - 5. Scroll to the chosen option and press
the
Tuning Control Rotary to confirm the selection. Note that you can only set the alarm to
use a preset which has already been stored.