Sangean WFR-29C (V1) - Manual (Page 75)

74
GB
Brightness control
The brightness of the display can be adjusted for when the radio is in standby and for when it is
in use. If you use the unit in the bedroom, you may prefer a lower standby brightness level than a
higher brightness setting.
. Press the Standby button to switch on your radio. Access the menu for the current mode by
pressing the Menu button.
2. Rotate the Tuning Control Rotary until 'System settings' is highlighted on the display. Press the
Tuning Control Rotary to enter the system settings menu. Rotate the Tuning Control Rotary
until 'Brightness' is highlighted on the display. Press the Tuning Control Rotary to confirm the
setting.
. In brightness menu, there are  settings:
Time out:to adjust the length of time before the backlight turns off.
On level: to adjust the the brightness when the radio is in use.
Dime level: to adjust the brightness when the radio is in stanby. Rotate the Tuning Control
Rotary to select your option and press the Tuning Control Rotary to confirm your setting.
2-3
1
1
iPod
Aux in
Sleep
Alarms
System settings
Main menu
>
Timeout
On level
Dim level
Backlight
>
>
>
Brightness
Contrast
Equaliser
Network
Time/Date
System settings
>
>
>