Sangean WFR-28C (R1) - Manual (Page 79)

78
GB
Information
Factory reset
If you wish to completely reset your radio to its initial state this may be performed by following
this procedure. By performing a factory reset, all user entered settings will be erased.
1. Access the menu for the current mode by pressing the Menu button. Rotate the Tuning Control
Rotary to highlight the 'Main menu' option, then press the Tuning Control Rotary to confirm.
2. Rotate the Tuning Control Rotary until 'System settings' is highlighted and then press the
Tuning Control Rotary to confirm the setting.
3. Rotate the Tuning Control Rotary until 'Factory Reset' is highlighted and then press the Tuning
Control Rotary to confirm the setting. Rotate the Tuning Control Rotary to highlight 'YES' to
proceed. If you do not wish to carry out a system reset, highlight 'NO' and then press the
Tuning
Control Rotary to confirm the setting. The display will revert to the previous menu.
4. With 'YES' highlighted, a full reset will be performed and the radio will restart as if first plugged
in. The DAB stations list together with any preset stations will be erased and your wireless
network connection details will be lost. All configuration settings will be restored to their defaults,
the clock and alarms will be reset.
In case of malfunction for any reason, reset the product as described above to resume normal
operation. It may be necessary in some cases to disconnect the mains power, then reconnect
power after 10 seconds. In case of malfunction due to electrical fast transient (burst), reset
the product as above (reconnection of the power source may be required) to resume normal
operation.
1
1-3
Main menu
FM
Aux in
Sleep
Alarms
System settings >
System settings
Time/Date
Language
Touch pad set
Rec. Default dest.
Factory reset
>
>
>
>
Proceed?
Factory reset
Start now?
Setup wizard
WELCOME TO
DIGITAL RADIO