Sangean Package PR-D5 (V1) - Manual (Page 7)

6
GB
Storing station presets
There are 5 memory presets for each waveband – STATION PRE-
SETS  to 5.
. Press the Power button to turn on the radio.
2. Tune to required station using one of the methods previously
described.
3. Press and hold the required preset until the radio beeps.
The preset number will appear in the display (such as: )
and the station will be stored under chosen preset button.
4. Repeat this procedure for the remaining presets.
5. Stations stored in preset memories can be overwritten by
following above procedures.
Recalling stations presets
. Press the Power button to turn on the radio.
2. Select the required waveband.
3. Momentarily press the required Preset button, the preset number
and station frequency will appear in the display.
RDS function
This function only applies when FM station which is listening pro-
vides the RDS service.
. When FM station provides RDS service, shows on the
display and the display shows the program type and then shows
the radio text if radio text is provided.
2. Press and hold CT button for more than 2 seconds until it beeps,
then the radio clock time will be automatically corrected. When it
shows “No CT” means there is no service.