Clarity Telephone User Manual
Page 21
14
Operating your JV-35
position and
your recordings will be
played when you press
an Emergency button.
L. Recording Memory
Button Identification
Announcements
Factory pre-recorded
announcements identify each
memory button. You can
erase these announcements
and record your own
announcements, such as
“Bob’s Number,” or “Bank.”
Record announcements by
following these steps.
1. Pick up the handset
2. Slide the
ANNOUNCEMENT
switch to the PROG
position. You will hear
“Program Mode,
Program Mode”
followed by a “beep-
beep” sound to confirm
the JV-35 is ready to
be programmed.
3. Press the MEMORY
button plus the desired
number buttons
(0, 1, 2, etc.). After the
“beep,” record an
announcement
like “Bob’s number” or
Fig. 24 - Custom Announcement
Fig. 25 - Programming Announcement